Ensure Scaffolding Safety

Scaffolding safety is one of the many issues workers in construction sites face day in and day out. There are actually three areas that comprise this matter. They are the security of the scaffold system, the use of protective pieces of equipment and the observance of safe work practices. Osha courses in Islamabad will help you in detail understand how safety in scaffolding works

The design and the structure of the scaffold towers used by the construction workers matter a lot. Both identify whether a tower is safe to climb on or not. As you set up one for your team, be ready to the proper inspection. Now, what are the things you need to inspect to ensure Scaffolding safety? First and foremost, check the footings. These are the very foundation of the entire tower and so it is important to know whether it can hold the weight that will be put into it.

Guardrails, toe boards, cross braces and ladders are the next things in osha courses in islamabad. Guardrails are very important as far as support is concerned. Their measurements should at least be two inches by four inches wide and three to three and a half feet high. They have to be spaced at least every 10 feet apart on all open sides of the scaffold. Any neglect on these measurements can cause danger to workers.

Toe boards keep people passing underneath the tower from getting hurt. Without the toe boards, construction materials will constantly fall off. This is a common cause of unwanted accident s in the site. Cross braces and ladders are useful when getting on and off the tower. Both them should be handy and very much secured when needed. If your team is using wooden scaffolds, ensure that the planks are beyond the end supports by six to eighteen inches. Inspect the poles as well for any sign of damage.

The use of protective gears is often underscored during osha courses in rawalpindi. This is because protective gears also play a vital role in the security of all the workers. Hard hats are required to worn by the workers and even the non- workers who are simply visiting the site. All workers are advised to wear non-skid shoes. Skid shoes would make it difficult for them to get a grip when they climb up and down the tower. Safety belts are a requirement for those who work on swinging scaffolds. These belts have to be attached to a secure line or structure for support.

Finally, there are things which must be done and must not be done by the workers in the name of scaffolding safety. The first thing they all have to do is check whether the tower is firmly secured before they hop onto it. Overloading is a big contributor to accidents and so any possibility of it is discouraged. Be reminded that you ought to bring only the tools you need and the construction materials in the tower to avoid excess weight. If it is raining, scatter sand on the scaffold surface to avoid slipping. Keep all the things you used as soon as your shift is done.